Why Is My Vape Spitting? Causes, Solutions, and Tips for a Better Vaping Experience

Have you ever been in the middle of a nice vape session when your vape suddenly starts spitting at you? It's not only annoying, but it can also ruin your entire vaping experience. So, why is my vape spitting, and how can you fix it? Keep reading to find out!

Common Causes of Vape Spitting

Low Coil Position

One of the most common reasons your vape might be spitting is that your coil is too low. When your coil isn't getting enough juice, it starts to heat up unevenly, which can cause spitting. The uneven heating leads to the e-liquid not vaporizing properly, causing it to spit back up through the mouthpiece. This is a frequent issue when asking, "Why is my vape spitting?"

When the coil is positioned too low in the tank, it doesn’t receive an adequate amount of e-liquid, resulting in insufficient saturation. This can cause the coil to overheat and produce hot droplets of e-liquid that spit back into your mouth. This is not only unpleasant but can also lead to a burnt taste.

To fix this issue, ensure your tank is always adequately filled with e-liquid. Keeping the e-liquid level above the minimum line ensures the coil is always sufficiently saturated. Additionally, prime the coil properly before use to avoid dry hits.

Blocked Airflow

Another common reason for spitting is blocked airflow. If your airflow is restricted, it can cause your vape juice to heat up too much, which also causes it to spit. Blockages can occur due to debris or improper adjustment of the airflow settings on your tank or atomizer. When you wonder, "Why is my vape spitting?" blocked airflow is often the culprit.

Airflow is crucial for maintaining the right temperature and ensuring the proper vaporization of e-liquid. When the airflow is blocked, the coil overheats and vaporizes the e-liquid too quickly, causing it to spit. This can be particularly problematic if you vape in a dusty or dirty environment, as particles can easily clog the airflow holes.

Regularly cleaning your tank and checking the airflow holes for debris can help prevent this issue. Adjusting the airflow settings for adequate ventilation can also ensure a smoother vaping experience. If your airflow settings are too tight, consider loosening them to see if it helps reduce spitting.

Old or Damaged Coil

If you use an old or damaged coil, your vape can also spit. Over time, coils degrade and can develop issues such as uneven heating, which results in spitting. Regular maintenance and timely coil replacements are crucial to prevent this problem.

Coils have a limited lifespan and should be replaced regularly to maintain optimal performance. When a coil becomes old or damaged, it can no longer heat the e-liquid evenly, leading to spitting and a burnt taste. If you notice that your vape is spitting more frequently, it might be time to replace the coil.

To prevent spitting due to old or damaged coils, keep track of your coil usage and replace them as needed. Depending on how often you vape, most coils last between one to two weeks. If you’re a heavy vaper, you may need to replace your coil more frequently to maintain a good vaping experience.

Practical Solutions to Fix Vape Spitting

Refill Your Tank

If your coil is too low, simply refill your tank and soak for a few minutes before taking another puff. Ensuring your coil is properly saturated with e-liquid helps prevent uneven heating and spitting. This simple step can often answer the question, "Why is my vape spitting?"

Properly refilling your tank is crucial to prevent spitting. Ensure you fill the tank up to the recommended level and avoid overfilling it, as this can also cause issues. Allow the e-liquid to sit in the tank for a few minutes to ensure the coil is fully saturated before you start vaping again.

If you use a rebuildable atomizer, wick the coil correctly to ensure saturation. Improper wicking can lead to dry hits and spitting, so take your time to do it right. High-quality e-liquids with the appropriate VG/PG ratio can also help reduce the likelihood of spitting.

Check and Adjust Airflow

If your airflow is restricted, ensure no debris blocks the airflow holes on your tank or atomizer. Adjust the airflow settings to ensure smooth, unrestricted airflow. Proper airflow helps maintain the correct temperature and prevents overheating, which can lead to spitting.

Blocked airflow is a common issue that can cause spitting. Regularly check and clean the airflow holes to remove any debris or dirt that might obstruct the airflow. Use a soft brush or cloth to clean the airflow holes without damaging the components.

Adjusting the airflow settings can also help improve your vaping experience. If the airflow is too tight, the coil may overheat and cause spitting. Loosening the airflow settings can help maintain a balanced temperature and prevent spitting. Experiment with different airflow settings to find the best one for you.

Replace the Coil

If you're using an old or damaged coil, try replacing it with a new one. Coils should be replaced regularly to maintain optimal performance and avoid issues like spitting. A fresh coil ensures even heating and a better vaping experience, reducing the chances of spitting.

Replacing the coil is a straightforward process that can significantly impact your vaping experience. Follow the manufacturer’s instructions for replacing the coil and ensure it is properly installed. Prime the new coil by allowing it to soak in e-liquid for a few minutes before use to ensure it is fully saturated.

Using high-quality coils can also help reduce spitting. Look for coils that are compatible with your device and offer good performance. Avoid counterfeit or low-quality coils, which can degrade quickly and cause issues like spitting.

Tips to Prevent Vape Spitting

Proper Priming

Properly priming your coil before use is essential to prevent spitting. Priming ensures the coil is fully saturated with e-liquid, which helps avoid dry hits and spitting. When you get a new coil, let it soak in e-liquid for a few minutes before you start vaping.

Many vapers overlook the crucial step of priming the coil. To prime the coil, add a few drops of e-liquid directly to the cotton-wicking material inside it. Then, fill the tank with e-liquid and allow it to sit for a few minutes to ensure the coil is fully saturated.

Taking gentle puffs without pressing the fire button can also help prime the coil. This helps draw e-liquid into the coil without causing it to overheat. Properly priming the coil can prevent spitting and ensure a smooth vaping experience.

Adjusting Wattage

Setting the correct wattage for your device is crucial. Using the recommended wattage range for your coil ensures proper e-liquid vaporization and prevents spitting. Always check the manufacturer's guidelines for the best wattage settings for your coil.

Using the right wattage settings can significantly improve your vaping experience. If the wattage is too high, the e-liquid can vaporize too quickly, leading to spitting. Conversely, if the wattage is too low, the coil can heat unevenly and produce spitting.

Experiment with different wattage settings to find the best one for your device and coil. Start with the recommended range and adjust to achieve the desired vapour production and flavour. Using a variable wattage device can give you more control over your vaping experience.

Using the Right E-Liquid

Choosing e-liquids that reduce spitting can enhance your vaping experience. Ideal VG/PG ratios help minimize spitting, as thicker e-liquids (higher VG content) vaporize more consistently and prevent flooding. Using high-quality e-liquids also ensures a smoother vape.

The VG/PG ratio of your e-liquid can affect how it vaporizes and whether it causes spitting. E-liquids with a higher VG content are thicker and less likely to flood the coil, reducing the risk of spitting. On the other hand, e-liquids with a higher PG content are thinner and can cause flooding and spitting if used with the wrong coil.

Choosing e-liquids from reputable manufacturers can also help ensure consistent quality and performance. Avoid using cheap or low-quality e-liquids, as they may contain impurities that can cause spitting and other issues. Look for e-liquids with good reviews and a solid reputation in the vaping community.

Conclusion

If your vape starts spitting at you, it's not only annoying—it can also ruin your entire vaping experience. Luckily, you can do a few things to fix the problem. The most common reasons for spitting are that your coil is too low, or your airflow is restricted. If those aren't the problem, try replacing your coil with a new one. Hopefully, one of these solutions helps solve why your vape is spitting.

By understanding the causes of vape spitting and implementing the solutions and tips provided, you can enjoy a smooth and satisfying vaping experience. Regular maintenance, proper coil priming, and using the right e-liquids are key to preventing spitting and ensuring your vape performs at its best.

FAQ

Why does my vape spit even with a new coil? Improper priming or overfilling the coil can cause spitting. Ensure the coil is properly primed and not overfilled.

Can using a different e-liquid reduce spitting? Yes, a thicker e-liquid (higher VG content) can reduce spitting, as it vaporizes more consistently and prevents flooding.

Is it safe to vape if it's spitting? While generally safe, spitting can be uncomfortable and may lead to hot e-liquid hitting your mouth. It's best to fix the issue to avoid discomfort.

How often should I replace my vape coil? Depending on usage, you should typically replace your coil every one to two weeks. Frequent vapers may need to replace coils more often.

Can adjusting wattage settings help with spitting? Adjusting your wattage to the recommended range for your coil can help prevent spitting by ensuring proper vaporization of the e-liquid.

What should I do if my vape still spits after trying these solutions? If your vape continues to spit after trying these solutions, it might be time to consult the manufacturer or visit a vape shop for professional advice. There could be an issue with your device that requires further inspection.

Can I prevent spitting by changing my vaping style? Yes, taking slower and more controlled puffs can help prevent spitting. Rapid, forceful inhales can cause the coil to flood and lead to spitting. Adjusting your vaping style to a more relaxed pace can improve your experience.

Are there specific coils that are less prone to spitting? Some coils, like those with mesh heating elements, are designed to minimize spitting. Mesh coils provide more even heating and better e-liquid vaporization, reducing the risk of spitting. Consider switching to mesh coils if you frequently experience spitting.

Is it normal for new vapes to spit a little when first used? New vapes are not uncommon to spit a little when first used, especially if the coil is not properly primed. This initial spitting usually subsides after a few puffs. Properly priming the coil and starting at a lower wattage can help reduce this initial spitting.

Can environmental factors affect spitting? Environmental factors such as temperature and humidity can affect how your vape performs. High temperatures can cause the e-liquid to thin out and flood the coil, leading to spitting. Similarly, high humidity can affect the vaporization process. Be mindful of your environment and adjust your vaping setup accordingly.

By addressing the causes of vape spitting and following the solutions and tips provided, you can enjoy a smooth and satisfying vaping experience. Regular maintenance, proper coil priming, and using the right e-liquids are key to preventing spitting and ensuring your vape performs at its best.

At VapeMeet, we're committed to providing you with premium vaping solutions. Explore our range of products, take advantage of exclusive deals, and discover how to get free shipping. Follow our Instagram page to stay updated with all our deals and promotions!